ZX10R

New products

Viewed products

Regulator Rectifier Mosfet Lithium Kawasaki Ninja ZX10R Ninja ZX14 Concours 14 OEM 21066-0008 21066-0022 21066-0714 21066-0744

CARMS023-106203

New product

OEM 21066-0008 21066-0022 21066-0714 21066-0744

More details

4 Items

3-5 Days

129,00 € tax incl.

More info

    Regulator Rectifier Mosfet Lithium-Ion Kawasaki Ninja ZX10R Ninja ZX14 Concours 14 

    2004-2007 Kawasaki Ninja ZX10R

      2006-2011  Kawasaki ZX1400  Ninja ZX14

        2012-2022  Kawasaki  ZX1400  Ninja ZX14R

          2008-2017 Concours 14

          OEM 21066-0008 21066-0022 21066-0714 21066-0744

          • It runs cooler than all OEM diode style regulators. In addition, this rectifier has overheat protection, rather than burn up it will simply turn off for a while and cool off.

            Improved heat sink and charging capabilities

            Before installing your new voltage regulator rectifier:
            Check the AC output of the stator.
            Replace any burned or corroded connectors on stator and regulator/rectifier
            Check and repair any melted wiring.
            Use hi-temp dielectric grease on all connectors.

          • This product is an advanced design that lowers operating temperatures for extended longevity and better performance than the OEM part.
            Brand new Mosfet voltage regulator rectifier
            WORKS WITH LITHIUM BATTERIES ONLY
            STOP BURNING YOUR REGULATOR RECTIFIER!
            It is time to update or replace your voltage regulator with the advanced MOSFET type.
            It runs cooler than all OEM diode style regulators. In addition, this rectifier has overheat protection, rather than burn up it will simply turn off for a while and cool off.
            Direct replacement to your original unit.
            Plug-and-play, direct fit, easy installation.
            The quality exceeds the OEM equipment
            Higher grade of electric components.
            All shipped products are tested. All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
            We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause for repetitive electrical issues.
            *All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
            Why do you need a different voltage regulator for lithium batteries?
            Lithium batteries have different charging requirements than Lead Acid or AGM batteries that can severely affect their lifespan and performance. The key factors in safe and reliable lithium battery charging are the output DC voltage ripple and average output voltage. The regulator is designed around the optimal parameters for these factors.
            The ripple effect is all that matters
            Charging voltage ripple in a powersports application is the difference between the highest and lowest voltages from the voltage regulator output. By nature, a common shunt style voltage regulator will have a fairly high voltage ripple due to the regulation shunt switches opening and closing frequently. Each on/off transition will cause some variation in the output voltage, this is unavoidable. Keeping this to minimum is critical for Lithium batteries, and the RMSTATOR Lithium regulator is designed around this feature.
            In a perfect world, a ripple of less than 10% of the output voltage (~1.5V for a typical regulator), would be ideal, however is not practical for this type of regulator. The  Lithium regulator is able to maintain a less than 4 Volts output ripple, compared to verified test results of our competitors 8 volts. Keep in mind this ripple voltage is only seen via an Oscilloscope sampling the voltage 1000’s of times a second, and is not the same as your average charging voltage as measured by a multimeter.
            PLEASE NOTE : This universal voltage regulator is ONLY for lithium batteries THIS IS NOT FOR LEAD ACID BATTERIES. Output Voltage is the key factor in a voltage regulator designed specifically for Lithium batteries. The ideal charging voltage for Lithium batteries is 13.9-14.2VDC. The RMSTATOR regulator has a carefully set output voltage of 14.1VDC (+/- 0.1VDC). This stable and ideal output voltage carefully keeps a lithium battery in it’s ideal charging range.
            Please contact the manufacturer of your Lithium Ion Battery to ensure our product has the correct set point for their product
            Protect your investment in an expensive lithium battery with our lithium battery voltage regulator!

          Reviews

          No customer reviews for the moment.

          Write a review

          Regulator Rectifier Mosfet Lithium Kawasaki Ninja ZX10R Ninja ZX14 Concours 14 OEM 21066-0008 21066-0022 21066-0714 21066-0744

          Regulator Rectifier Mosfet Lithium Kawasaki Ninja ZX10R Ninja ZX14 Concours 14 OEM 21066-0008 21066-0022 21066-0714 21066-0744

          OEM 21066-0008 21066-0022 21066-0714 21066-0744